SATGEAR CO
SATGEAR MM7 - Ford Bed Mount for Starlink Mini (MM1 + VSM + Bed Tie-Down Adopter)
***SHIPS WORLDWIDE***
The SatGear Bed Mount System is the solution Ford truck owners have been asking for.
For over a year, customers with Ford aluminum-body trucks have been looking for a reliable way to mount their Starlink Mini without relying on magnets and suction cups. Because these trucks use aluminum panels, traditional magnetic mounting isn’t an option and suction cups require ongoing maintenance.
This system solves that problem by providing a secure, permanent mounting solution using your truck’s factory BoxLink bed cleat mounting points.
Designed for Ford BoxLink Bed Cleat System
This system is engineered to replace one of your factory bed cleat plates and mount directly into the truck bed wall.
Compatible with:
• 2015–Present Ford F-150 (when equipped with BoxLink Cleat System)
• 2017–Present Ford F-250, F-350, F-450 Super Duty (with bed BoxLink cleat mounting points)
If your truck has removable bed cleats, this system is designed to fit.
Magnet-Free Mounting for Aluminum Body Trucks
Ford’s aluminum body construction prevents the use of magnetic mounts. This system eliminates that limitation by creating a secure mechanical mounting point directly tied into the structure of your truck.
Once installed, your Starlink Mini stays firmly mounted without the need for re-pumping suction cups or relying on magnets.
Integrated Tie-Down Anchor Points
The adapter includes built-in anchor points so you can still use your truck bed for securing cargo.
You don’t lose functionality — you gain a mounting system while maintaining full tie-down capability for tools, gear, and equipment.
Adjustable Height for Bed and Tonneau Cover Fitment
The SatGear bed mount features a multi-level height adjustment system, allowing you to raise or lower the Starlink Mini up to approximately 4 inches.
This allows you to dial in the perfect position based on your truck setup:
• Raise the mount to sit flush with the top of the bed when no tonneau cover is installed
• Lower the mount to fit underneath a tonneau cover for a clean, protected setup
When installed under a tonneau cover, the Starlink signal can still pass through, allowing you to maintain connectivity while keeping the system enclosed and protected.
This adjustability ensures compatibility across a wide range of truck bed configurations without compromising performance or fitment.
Heavy-Duty Steel Bed Tie-Down Adapter
At the foundation of the system is a custom-engineered steel adapter designed specifically for Ford’s bed cleat mounting points.
• Constructed from high-strength steel
• Built for maximum durability and rigidity
• Designed to handle real-world work and off-road conditions
This provides an extremely strong mounting base compared to traditional mounting methods.
Complete Vertical Mount System (VSM + MM1)
This kit includes the Vertical Surface Mount (VSM) and MM1 Protective Mount, creating a secure vertical installation inside your truck bed.
At the core is the MM1, featuring:
• High-strength aluminum enclosure
• Durable 5mm polycarbonate top cover
• Full protection from debris, vibration, and impact
• Signal-transparent design with no performance loss
Modular and Multi-Use System
This is not just a fixed setup.
The VSM and MM1 can be removed from the bed mount and used separately in other configurations — the same setup used in the MM6 system.
This allows you to:
• Use the bed mount on your truck
• Remove the MM1 + VSM and use it on another vehicle
• Reconfigure your setup for different applications
You’re not locked into one installation.
Clean 12V Power Integration (7-Way Trailer Plug)
The system includes a 7-way trailer plug to 12V adapter, allowing you to power your Starlink Mini directly from the rear of your truck.
• Plugs into your factory 7-way trailer connector
• No need to run cables into the cab
• Clean, organized installation
• Ideal for permanent setups
This creates a streamlined setup with no exposed wiring running across your vehicle.
Ideal For
• Ford F-150 (2015–Present) with BoxLink
• Ford F-250, F-350, F-450 (2017–Present)
• Contractors and service vehicles
• Fleet operators
• Off-road and overland users
• Customers who need a permanent, magnet-free mounting solution
The SatGear Bed Tie-Down Mount System delivers a clean, permanent, and extremely strong mounting solution built specifically for Ford aluminum-body trucks — solving one of the most requested challenges from customers.
Optional: Use as a MM6 Mount
This is not just a fixed mounting solution.
The included Vertical Surface Mount (VSM) and MM1 Protective Mount can be removed from the bed tie-down adapter and used independently in other configurations — the same setup used in the SatGear MM6 system.
This allows you to:
• Use the bed tie-down mount on your Ford truck
• Remove the MM1 + VSM and use it on another vehicle
• Reconfigure your setup for different mounting applications
You’re not locked into one installation.
Important: U-Brackets Required for VSM Standalone Use
To use the VSM and MM1 outside of the Ford bed mount system (MM6-style setup), you must select the optional U-brackets in the product options.
The U-brackets are required because they:
• Attach suction cups or magnets to the VSM
• Allow for hard-mount installation if desired
• Enable full vertical surface mounting functionality
Without the U-brackets, the VSM cannot be used as a standalone mounting system.
Configurable Mounting Options (MM6 Functionality)
When selecting the U-brackets, you can configure your setup just like the MM6 system:
Suction Cup Option
• Uses two mounting points
• Available with manual or electronic suction cups
• Electronic suction cups automatically re-pump below 80% vacuum
• Rechargeable via USB and lasts approximately 2–3 weeks per charge
Magnetic Option
• Uses two high-strength magnets
• Provides a strong, secure hold on steel surfaces
Hard-Mount Option
• Use the U-brackets directly for permanent installation
• Ideal for trailers, service bodies, and fixed structures
This gives you the flexibility to use the same system across multiple vehicles and mounting environments.
LIMITED TIME SPECIAL - FREE 12V (14AWG) cable to plug Starlink Mini into a cigarette lighter in 6', 10', 15' and 25' lengths ($29-59 Value). You can view the 12V cable here.
Key Features:
• Ford BoxLink Bed Cleat Compatibility
Designed to mount directly into factory bed cleat locations on Ford trucks, including 2015–Present F-150 and 2017–Present F-250, F-350, and F-450 Super Duty models equipped with BoxLink.
• Permanent, Magnet-Free Mounting Solution
Engineered specifically for aluminum-body Ford trucks where magnets cannot be used, providing a secure and maintenance-free mounting option.
• Heavy-Duty Steel Bed Tie-Down Adapter
Constructed from high-strength steel for maximum durability and rigidity, creating an extremely solid mounting foundation inside the truck bed.
• Integrated Tie-Down Anchor Points
Built-in anchor points allow you to continue securing cargo, tools, and gear without sacrificing your truck bed’s functionality.
• Complete Mounting System (MM1 + VSM Included)
Includes the SatGear MM1 Protective Mount and Vertical Surface Mount (VSM) for a secure, fully integrated vertical mounting solution.
• Fully Enclosed Starlink Mini Protection
MM1 features a high-strength aluminum enclosure and a durable 5mm polycarbonate top cover that protects the dish from debris, impact, and weather without affecting signal performance.
• Modular and Multi-Use Design
MM1 and VSM can be removed and used independently in other configurations, allowing you to transfer your setup between vehicles or applications.
• Clean 12V Power Integration
Includes a 7-way trailer plug to 12V adapter, allowing direct power from the rear of your truck without running cables into the cab.
• Quick Installation with Factory Mounting Points
Installs using existing bed cleat locations for a clean, OEM-style fit with no drilling or permanent vehicle modification required.
• Built for Work and Off-Road Environments
Designed to withstand vibration, heavy use, outdoor exposure, and demanding job site or overland conditions.
• Ideal for Fleet and Service Vehicles
Perfect for contractors, fleet operators, and mobile professionals who need a reliable, permanent Starlink mounting solution.
• Weather Resistant Construction
Built to handle rain, dust, heat, and harsh environments for consistent performance in all conditions.
Note: Starlink Satellite Internet System Sold Separately
PRODUCT SPECIFICATIONS:
- Package Includes: MM1, VSM (Vertical Surface Mount), Ford Bed Tie-Down Adopter, 7 Pin Connector to 12V Adopter
- Material: High-grade aluminum
- Cover: Strong 5mm polycarbonate
- Compatibility: Starlink Mini
- Weather Resistance: Yes
United States, Canada and Mexico orders ship via UPS
products.product.pickup_availability.unavailable
){kind=link}
Product information
RICH TEXT
We understand that creating your custom size can feel daunting. But not to worry, it's actually quite easy and completely risk-free. If you're not 100% happy with your fit, we'll remake your first shirt from scratch free of charge or give your money back.
PRODUCT FEATURES
ADD A SUBHEADING
BACKGROUND VIDEO
F.A.Q.
They appreciate cut and details, things that aren't so obvious.
What payment methods can I use?
We offer 35 different payment methods including major providers like Mastercard, Visa, PayPal, American Express and Diners as well as many different local payment methods including Klarna, iDEAL, AliPay, Sofort, giropay, and many more.
Can I purchase items with another currency?
Yes, you may select a currency based on your personal preference. When you select your country in the country selector on the upper right of the website or are taken directly to your country’s version of the website, you will see prices listed in the regional currency.
Can I make changes to my order after it’s been placed?
We do everything we can to fulfill orders quickly and unfortunately cannot make updates after an order has been placed. These changes include removing or adding products and/or changing the delivery address. If a mistake has been made with your order information, it’s quickest to create a new order with the correct information and then let our Customer Service.
Do you offer e-gift cards for international customers?
E-gift cards are only available to customers shipping within the U.S.
How Do I Set Up A Subscription Order?
We will deliver products to you as soon as reasonably possible. Orders are usually dispatched between 1-3 days from the date of the order being placed. Please contact us our customer service team if your delivery has not been received within the dates described.
How To Return My Items?
We do not currently offer free returns to overseas customers. You will therefore need to cover all costs of returning any items to us yourself. We advise that you mark your package ‘returned goods’ to avoid further duties. Remember: We strongly recommend that you return any items via a registered trackable service and obtain and retain proof of posting as we do not accept responsibility for items that fail to arrive with us.