{"title":"Starlink Mini Accessories","description":"","products":[{"product_id":"vertical-surface-mount","title":"VSM (Vertical Surface Mount) for MM1, SM1, SM2 \u0026 SM3 Mounts","description":"\u003cp\u003e\u003cstrong\u003e***SHIPS WORLDWIDE***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"88\" data-end=\"467\"\u003eThe SatGear VSM (Vertical Surface Mount) attachment was designed to allow the SatGear MM1, SM1, SM2 and SM3 mounts to be mounted to vertical surfaces. Such as such as vehicle side panels, RV walls, trailers, semi trucks, offroad vehicles, vans, service vehicles, equipment enclosures, shipping containers, and other upright surfaces where horizontal mounting is not practical.\u003c\/p\u003e\n\u003cp data-start=\"469\" data-end=\"763\"\u003eBuilt for versatility and strength, this attachment works seamlessly with SatGear MM-Series and SM-Series mounts, including the MM1, SM1, SM2, and SM3. It provides a stable and secure mounting interface while maintaining the same rugged reliability and flexibility SATGEAR mounts are known for.\u003c\/p\u003e\n\u003cp data-start=\"765\" data-end=\"908\"\u003eThis Vertical Surface Mount Attachment offers three secure installation methods, allowing you to choose the best solution for your application:\u003c\/p\u003e\n\u003cp data-start=\"910\" data-end=\"1430\"\u003e\u003cstrong\u003eSuction Cup Mounting:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"910\" data-end=\"1430\"\u003eAttach using two large 6-inch heavy-duty suction cups for an extremely strong hold on smooth surfaces. Customers can choose between manual pump suction cups or electronic suction cups directly on the product page. Both options provide exceptional holding strength, with the larger 6-inch diameter offering significantly more surface contact and grip compared to smaller suction cups. This option is ideal for temporary installations, vehicle mounting, and situations where drilling is not desired.\u003c\/p\u003e\n\u003cp data-start=\"1432\" data-end=\"1834\"\u003e\u003cstrong\u003eMagnetic Mounting:\u003c\/strong\u003e\u003cbr\u003e\u003cbr data-start=\"1449\" data-end=\"1452\"\u003eMount using two, 3.5\" ultra-strong magnets, each rated at over 130 pounds of pull force. With more than 260 pounds of total holding strength, this option provides an incredibly secure attachment to steel surfaces such as vehicle bodies, equipment panels, and metal enclosures. This allows for fast installation, easy repositioning, and reliable performance even in demanding environments.\u003c\/p\u003e\n\u003cp data-start=\"1836\" data-end=\"2211\"\u003e\u003cstrong\u003eHard Mount Installation:\u003c\/strong\u003e\u003cbr\u003e\u003cbr data-start=\"1859\" data-end=\"1862\"\u003eFor permanent installations, the attachment includes integrated mounting brackets with pre-drilled holes, allowing you to securely fasten the mount directly to any vertical surface using screws or bolts. This method provides maximum long-term stability and is ideal for trailers, service bodies, equipment enclosures, walls, and fixed installations.\u003c\/p\u003e\n\u003cp data-start=\"2213\" data-end=\"2441\"\u003eConstructed from precision-cut aluminum and finished with a durable powder coat, this attachment is built to withstand vibration, weather, and demanding real-world conditions while keeping your Starlink Mini securely positioned.\u003c\/p\u003e\n\u003cp data-start=\"2443\" data-end=\"2605\"\u003ePerfect for existing SatGear mount owners who want the flexibility to mount their Starlink Mini on vertical surfaces without replacing their current mount system.\u003c\/p\u003e\n\u003cp data-start=\"2607\" data-end=\"2878\"\u003e\u003cstrong\u003eCompatibility: \u003c\/strong\u003e\u003cbr\u003e\u003cbr data-start=\"2620\" data-end=\"2623\"\u003eCompatible with SatGear MM1, SM1, SM2, and SM3 Starlink Mini mounts. Works with manual suction cups, electronic suction cups, magnets, or permanent hard-mount installation Designed specifically for the Starlink Mini when used with SatGear mount systems\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-start=\"292\" data-end=\"742\"\u003e\u003cstrong\u003eElectronic Suction Cup Option (Automatic Self-Pumping Technology):\u003c\/strong\u003e\u003cbr\u003e\u003cbr data-start=\"357\" data-end=\"360\"\u003eFor maximum convenience and reliability, customers can select the optional electronic suction cups, which automatically maintain optimal suction without manual intervention. These intelligent suction cups continuously monitor vacuum pressure and will automatically re-pump themselves whenever suction drops below approximately 80%, ensuring consistent holding strength at all times.\u003c\/p\u003e\n\u003cp data-start=\"744\" data-end=\"970\"\u003eThis eliminates the need for manual re-pumping, routine checking, or monitoring suction levels, making them ideal for long-term installations, vehicle mounting, and mission-critical applications where reliability is essential.\u003c\/p\u003e\n\u003cp data-start=\"972\" data-end=\"1352\"\u003eThe electronic suction cups are powered by a built-in rechargeable battery and can be easily recharged using a standard USB cable. On a full charge, they can operate for approximately 2 to 3 weeks while actively maintaining suction. They are also water-resistant and designed to withstand rain, snow, and harsh outdoor conditions, though they are not intended for full submersion.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAdjustable Angle for Optimal Satellite Alignment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"972\" data-end=\"1352\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eFeatures a built-in angle adjustability, allowing you to fine-tune the tilt of your Starlink Mini by approximately ±5 degrees. This allows you to compensate for vehicle panels or surfaces that are not perfectly vertical, ensuring your Starlink dish can be positioned at the optimal angle for the best possible satellite connection.\u003c\/p\u003e\n\u003cp data-start=\"720\" data-end=\"1012\"\u003eThis adjustability is especially valuable for vehicle side panels, trailers, service bodies, and equipment enclosures, where surface angles can vary. By allowing precise alignment, the mount helps maximize signal reliability and performance while maintaining a secure and stable installation. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003cimg height=\"366\" width=\"551\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0654\/3523\/8565\/files\/Starlink_Mini.webp?v=1727079886\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConverts Your Existing Mount for Vertical Installation:\u003c\/strong\u003e Allows your SatGear MM1, SM1, SM2, or SM3 mount to be securely installed on vertical surfaces such as vehicle side panels, walls, trailers, equipment enclosures, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree Secure Mounting Methods:\u003c\/strong\u003e Supports heavy-duty 6-inch suction cups (manual or electronic), ultra-strong magnets, or permanent hard-mount installation using integrated pre-drilled brackets, giving you complete installation flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLarge 6-Inch Heavy-Duty Suction Cup Compatibility:\u003c\/strong\u003e Designed to work with oversized 6-inch suction cups for maximum surface contact and holding strength. Available with manual pump suction cups or electronic suction cups for effortless installation and reliable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional Electronic Suction Cups with Automatic Self-Pumping:\u003c\/strong\u003e Available electronic suction cups automatically maintain suction by re-pumping whenever vacuum pressure drops below 80%, eliminating the need for manual pumping or monitoring. Rechargeable via standard USB and capable of operating for 2 to 3 weeks per charge, they are water-resistant and designed for reliable performance in rain, snow, and outdoor environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltra-Strong Magnetic Mounting Option:\u003c\/strong\u003e Include optional 2 quantity, 3.5\" high-strength magnets rated at over 130 pounds of pull force each, providing over 260 pounds of total holding strength for secure mounting on steel vehicle panels and equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePermanent Hard-Mount Capability:\u003c\/strong\u003e Integrated mounting brackets with pre-drilled holes allow for direct screw or bolt installation, making it ideal for permanent setups on trailers, service bodies, walls, and equipment enclosures.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Tilt for Optimal Starlink Performance:\u003c\/strong\u003e Features approximately ±5 degrees of angle adjustability, allowing you to fine-tune the dish orientation to compensate for non-vertical surfaces and achieve the best possible satellite connection and signal reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Compatibility with SatGear Mount Systems:\u003c\/strong\u003e  Works seamlessly with SatGear MM1, SM1, SM2 and SM3 Starlink Mini mounts, allowing existing customers to expand their mounting options without replacing their current system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Aluminum Construction:\u003c\/strong\u003e Manufactured from high-grade aluminum and finished with a durable powder coat, providing excellent strength, corrosion resistance, and long-term durability in demanding environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Mobile and Fixed Applications: \u003c\/strong\u003eIdeal for RVs, semi trucks, off-road vehicles, fleet vehicles, trailers, heavy equipment, and permanent infrastructure installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast Installation and Reconfiguration:\u003c\/strong\u003e Allows quick conversion of your existing mount for vertical use, making it perfect for temporary setups, mobile operations, or permanent installations.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"250\" width=\"250\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0654\/3523\/8565\/files\/iStock-1414392846.jpg?v=1739539042\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Starlink Satellite Internet System Sold Separately\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnited States, Canada and Mexico orders ship via UPS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SATGEAR CO","offers":[{"title":"Black Powder Coated ($149) \/ No I Don't Need Suction Cups \/ No I Don't Need Rubber Magnets","offer_id":51317925150998,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated ($149) \/ No I Don't Need Suction Cups \/ Yes Add Rubber Magnets ($30)","offer_id":51317925183766,"sku":null,"price":179.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated ($149) \/ Electronic (Automatic Self-Pumping) Suctions Cups ($149) \/ No I Don't Need Rubber Magnets","offer_id":51317925216534,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated ($149) \/ Electronic (Automatic Self-Pumping) Suctions Cups ($149) \/ Yes Add Rubber Magnets ($30)","offer_id":51317925249302,"sku":null,"price":328.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated ($149) \/ Manual Suction Cups ($97) \/ No I Don't Need Rubber Magnets","offer_id":51317925282070,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated ($149) \/ Manual Suction Cups ($97) \/ Yes Add Rubber Magnets ($30)","offer_id":51317925314838,"sku":null,"price":276.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($149) \/ No I Don't Need Suction Cups \/ No I Don't Need Rubber Magnets","offer_id":51317925347606,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($149) \/ No I Don't Need Suction Cups \/ Yes Add Rubber Magnets ($30)","offer_id":51317925380374,"sku":null,"price":179.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($149) \/ Electronic (Automatic Self-Pumping) Suctions Cups ($149) \/ No I Don't Need Rubber Magnets","offer_id":51317925413142,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($149) \/ Electronic (Automatic Self-Pumping) Suctions Cups ($149) \/ Yes Add Rubber Magnets ($30)","offer_id":51317925445910,"sku":null,"price":328.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($149) \/ Manual Suction Cups ($97) \/ No I Don't Need Rubber Magnets","offer_id":51317925478678,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($149) \/ Manual Suction Cups ($97) \/ Yes Add Rubber Magnets ($30)","offer_id":51317925511446,"sku":null,"price":276.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $119) \/ No I Don't Need Suction Cups \/ No I Don't Need Rubber Magnets","offer_id":51317925544214,"sku":null,"price":119.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $119) \/ No I Don't Need Suction Cups \/ Yes Add Rubber Magnets ($30)","offer_id":51317925576982,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $119) \/ Electronic (Automatic Self-Pumping) Suctions Cups ($149) \/ No I Don't Need Rubber Magnets","offer_id":51317925609750,"sku":null,"price":268.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $119) \/ Electronic (Automatic Self-Pumping) Suctions Cups ($149) \/ Yes Add Rubber Magnets ($30)","offer_id":51317925642518,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $119) \/ Manual Suction Cups ($97) \/ No I Don't Need Rubber Magnets","offer_id":51317925675286,"sku":null,"price":216.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $119) \/ Manual Suction Cups ($97) \/ Yes Add Rubber Magnets ($30)","offer_id":51317925708054,"sku":null,"price":246.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/20260206_231659.png?v=1778920205"},{"product_id":"dc-power-cable-for-starlink-mini-plugs-directly-into-cigarette-lighter-port","title":"12V DC Power Cable for Starlink Mini - Plugs Directly into Cigarette Lighter Port","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eChoose from 6', 10', 15', or 25' lengths to power your Starlink Mini via your vehicle's cigarette port. The cord includes a built-in inline fuse for protection and an LED indicator to confirm active power.\u003c\/p\u003e\n\u003cp\u003eThese cables are 14AWG. The primary advantage of a 14AWG cable over an 18AWG cable for a 12V cigarette lighter application is its ability to carry more current with less voltage drop. Here’s why that matters:\u003c\/p\u003e\n\u003cp\u003e1. Current Capacity: A 14AWG wire can handle higher currents (up to 15-20 amps) compared to 18AWG (up to 10 amps) without overheating. This makes 14AWG a better choice for powering devices that draw more current, like inverters or high-powered accessories.\u003c\/p\u003e\n\u003cp\u003e2. Less Voltage Drop: A thicker 14AWG wire has lower resistance than thinner 18AWG wire, which means less voltage is lost over the length of the cable. This is especially important in 12V systems where even small losses significantly impact performance.\u003c\/p\u003e\n\u003cp\u003e3. Durability: A 14AWG cable is generally more robust and durable, making it less prone to damage or overheating in demanding applications.\u003c\/p\u003e\n\u003cp\u003eWhen to Use Each:\u003c\/p\u003e\n\u003cp\u003e14AWG: Ideal for high-current devices, longer cable runs, or critical applications where voltage drop must be minimized.\u003c\/p\u003e\n\u003cp\u003e18AWG: Suitable for low-power devices (e.g., phone chargers or LED lights) and shorter distances.\u003c\/p\u003e\n\u003cp\u003eIf you're using the cable for a Starlink Mini device, the 14AWG option is the better choice.\u003cbr\u003e\u003c\/p\u003e","brand":"SatGear","offers":[{"title":"6ft ($29)","offer_id":51317946089750,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true},{"title":"10ft ($39)","offer_id":51317946122518,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"15ft ($49)","offer_id":51317946155286,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"25ft ($59)","offer_id":51317946188054,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/20250204_012452.png?v=1778920241"},{"product_id":"satgear-pole-mount-adapter","title":"Pole Mount Adapter for MM1, SM1, SM2 \u0026 SM3 Mounts","description":"\u003cp data-start=\"216\" data-end=\"297\"\u003eSatGear Pole Mount Adapter – 1.25\" Pole Mount Conversion for Starlink Mini Mounts\u003c\/p\u003e\n\u003cp data-start=\"313\" data-end=\"586\"\u003eThe SatGear Pole Mount Adapter allows you to convert your existing SatGear MM1, SM1, SM2, or SM3 mount into a secure pole-mounted installation. This adapter attaches directly to the bottom of your SatGear mount, enabling installation on any standard 1.25-inch pole or mast.\u003c\/p\u003e\n\u003cp data-start=\"588\" data-end=\"755\"\u003eThis provides a stable and elevated mounting solution ideal for permanent installations, mobile setups, and situations where roof or surface mounting is not practical.\u003c\/p\u003e\n\u003cp data-start=\"757\" data-end=\"784\"\u003e\u003cstrong\u003eQuick and Easy Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"786\" data-end=\"1080\"\u003eInstallation is fast and straightforward. The adapter attaches to the bottom of your SatGear MM1, SM1, SM2, or SM3 using just four screws, with all required hardware included. In minutes, you can convert your existing mount into a pole-mounted system without any modifications or special tools.\u003c\/p\u003e\n\u003cp data-start=\"1082\" data-end=\"1119\"\u003e\u003cstrong\u003eStandard 1.25-Inch Pole Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1121\" data-end=\"1392\"\u003eThe adapter is designed to fit standard 1.25-inch poles, making it compatible with antenna poles, mast poles, flag poles, roof-mounted poles, rack-mounted poles, and other pole mounting setups. Simply secure the adapter to any compatible pole using a standard pole clamp.\u003c\/p\u003e\n\u003cp data-start=\"1394\" data-end=\"1429\"\u003e\u003cstrong\u003eStrong and Stable Mounting Solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1431\" data-end=\"1627\"\u003ePole mounting allows your Starlink Mini to be elevated above surrounding obstructions, helping improve satellite visibility and connection reliability while keeping your mount securely positioned.\u003c\/p\u003e\n\u003cp data-start=\"1629\" data-end=\"1658\"\u003e\u003cstrong\u003eDurable Aluminum Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1660\" data-end=\"1841\"\u003eConstructed from precision-cut high-grade aluminum and finished with a durable powder coat, the adapter is built to withstand vibration, weather, and demanding outdoor environments.\u003c\/p\u003e\n\u003cp data-start=\"1843\" data-end=\"1995\"\u003ePerfect for existing SatGear mount owners who want to expand their mounting options to pole or mast installations without replacing their current mount.\u003c\/p\u003e\n\u003cp data-start=\"1997\" data-end=\"2011\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"2013\" data-end=\"2279\"\u003eCompatible with SatGear MM1 Protective Mount\u003cbr data-start=\"2057\" data-end=\"2060\"\u003eCompatible with SatGear SM1, SM2, and SM3 mounts\u003cbr data-start=\"2108\" data-end=\"2111\"\u003eAttaches using four screws (hardware included)\u003cbr data-start=\"2157\" data-end=\"2160\"\u003eFits standard 1.25-inch mounting poles\u003cbr data-start=\"2198\" data-end=\"2201\"\u003eDesigned specifically for Starlink Mini when used with SatGear mount systems\u003c\/p\u003e","brand":"SatGear","offers":[{"title":"Black Powder Coated ($97)","offer_id":51317946253590,"sku":null,"price":97.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($97)","offer_id":51317946286358,"sku":null,"price":97.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $79)","offer_id":51317946319126,"sku":null,"price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/20260207_013520.png?v=1778920245"},{"product_id":"satgear-mini-pole-adaptor","title":"MM4 Bracket Kit – Roof Rack \u0026 Suction Cup Brackets for the MM1","description":"\u003cp data-start=\"209\" data-end=\"547\"\u003eThe SatGear MM4 Bracket Kit allows you to convert your existing SatGear MM1 Protective Mount into a versatile mounting solution compatible with roof rack cross bars or suction cups. This gives MM1 owners the flexibility to securely mount their Starlink Mini on vehicles or smooth surfaces without purchasing a completely new mount system.\u003c\/p\u003e\n\u003cp data-start=\"549\" data-end=\"576\"\u003e\u003cstrong\u003eQuick and Easy Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"578\" data-end=\"765\"\u003eInstallation takes just minutes using four screws, two on each side, allowing you to quickly convert your MM1 into the MM4 configuration. No modifications or special tools are required.\u003c\/p\u003e\n\u003cp data-start=\"767\" data-end=\"792\"\u003e\u003cstrong\u003eIntegrated Wind Deflector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"794\" data-end=\"977\"\u003eThe front bracket features a built-in wind deflector designed to reduce wind resistance and minimize wind noise at highway speeds, making it ideal for vehicle roof rack installations.\u003c\/p\u003e\n\u003cp data-start=\"979\" data-end=\"1004\"\u003e\u003cstrong\u003eFlexible Mounting Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1006\" data-end=\"1285\"\u003eThe brackets allow secure installation on roof rack cross bars up to 3 inches wide, including aero-style cross bars. They are also fully compatible with SatGear suction cups for temporary or repositionable mounting on smooth surfaces such as vehicle roofs, glass, or body panels.\u003c\/p\u003e\n\u003cp data-start=\"1287\" data-end=\"1316\"\u003e\u003cstrong\u003eDurable Aluminum Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1318\" data-end=\"1489\"\u003eMade from precision-cut high-grade aluminum with a durable powder coat finish, these brackets are built to withstand vibration, weather, and demanding mobile environments.\u003c\/p\u003e\n\u003cp data-start=\"1491\" data-end=\"1505\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1507\" data-end=\"1728\"\u003eCompatible with SatGear MM1 Protective Mount\u003cbr data-start=\"1551\" data-end=\"1554\"\u003eCompatible with SatGear manual and electronic suction cups\u003cbr data-start=\"1612\" data-end=\"1615\"\u003eFits roof rack cross bars up to 3 inches wide\u003cbr data-start=\"1660\" data-end=\"1663\"\u003eDesigned for Starlink Mini when used with SatGear mount systems\u003c\/p\u003e","brand":"SatGear","offers":[{"title":"Black Powder Coated ($49) \/ No I don't need Suction Cups","offer_id":51317946417430,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated ($49) \/ Yes add Suction Cups ($69)","offer_id":51317946450198,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($49) \/ No I don't need Suction Cups","offer_id":51317946482966,"sku":null,"price":49.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($49) \/ Yes add Suction Cups ($69)","offer_id":51317946515734,"sku":null,"price":118.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $39) \/ No I don't need Suction Cups","offer_id":51317946548502,"sku":null,"price":39.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $39) \/ Yes add Suction Cups ($69)","offer_id":51317946581270,"sku":null,"price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/20260207_013142_V2.png?v=1778920248"},{"product_id":"mm5-l-brackets","title":"MM5 L Bracket Kit – Flat Surface \u0026 Roof Rack Mount Brackets for the MM1","description":"\u003cp data-start=\"285\" data-end=\"644\"\u003eThe SatGear MM5 L-Bracket Kit allows you to convert your existing SatGear MM1 Protective Mount into a secure flat surface mounting solution. These precision-engineered L brackets attach directly to the sides of the MM1, allowing it to be mounted onto flat surfaces such as roof racks, vehicle roofs, camper shells, trailers, cabinets, or equipment enclosures.\u003c\/p\u003e\n\u003cp data-start=\"646\" data-end=\"673\"\u003e\u003cstrong\u003eQuick and Easy Installation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"675\" data-end=\"854\"\u003eInstallation is fast and simple using just four screws — two per bracket. In minutes, you can convert your MM1 into a flat mount system without any modifications or special tools.\u003c\/p\u003e\n\u003cp data-start=\"856\" data-end=\"896\"\u003e\u003cstrong\u003eFlat Surface and Roof Rack Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"898\" data-end=\"1170\"\u003eThe L-bracket design allows your MM1 Protective Mount to be securely fastened to any solid flat surface using screws or bolts. This makes it ideal for permanent installations on roof racks, truck caps, RV roofs, trailers, service bodies, and other flat mounting locations.\u003c\/p\u003e\n\u003cp data-start=\"1172\" data-end=\"1203\"\u003e\u003cstrong\u003eLow-Profile and Secure Mounting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1205\" data-end=\"1363\"\u003eThe L brackets create a stable, low-profile installation that keeps your Starlink Mini securely mounted while maintaining a clean and professional appearance.\u003c\/p\u003e\n\u003cp data-start=\"1365\" data-end=\"1394\"\u003e\u003cstrong\u003eDurable Aluminum Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1396\" data-end=\"1581\"\u003eConstructed from precision-cut high-grade aluminum and finished with a durable powder coat, these brackets are built to withstand vibration, weather, and demanding outdoor environments.\u003c\/p\u003e\n\u003cp data-start=\"1583\" data-end=\"1713\"\u003ePerfect for existing SatGear MM1 owners who want a permanent flat surface mounting solution without replacing their current mount.\u003c\/p\u003e\n\u003cp data-start=\"1715\" data-end=\"1729\"\u003eCompatibility:\u003c\/p\u003e\n\u003cp data-start=\"1731\" data-end=\"1968\"\u003eCompatible with SatGear MM1 Protective Mount\u003cbr data-start=\"1775\" data-end=\"1778\"\u003eDesigned for flat surface and roof rack installations\u003cbr data-start=\"1831\" data-end=\"1834\"\u003eRequires four screws for full installation (included)\u003cbr data-start=\"1887\" data-end=\"1890\"\u003eDesigned specifically for Starlink Mini when used with SatGear mount systems\u003c\/p\u003e","brand":"SatGear","offers":[{"title":"Black Powder Coated ($29)","offer_id":51317946614038,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true},{"title":"White Powder Coated ($29)","offer_id":51317946646806,"sku":null,"price":29.0,"currency_code":"USD","in_stock":true},{"title":"Bare Aluminum (To Powder Coat Custom Color - $25)","offer_id":51317946679574,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/20260207_011812_V2.png?v=1778920250"},{"product_id":"satgear-rubber-magnets","title":"Rubber Magnets - 4 Pack","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSatGear's\u003cstrong\u003e \u003c\/strong\u003eRubber\u003cstrong\u003e \u003c\/strong\u003eMagnets comes in pack of 4\u003cstrong\u003e,\u003c\/strong\u003e available in two sizes: \u003cstrong\u003e1.69\"\u003c\/strong\u003e and \u003cstrong\u003e2.59\" \u003c\/strong\u003ein \u003cstrong\u003e1\/4\"-20 thread\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp\u003eDesigned for use with both small and larger mounts, these heavy-duty magnets provide a powerful, secure hold on metal surfaces, allowing you to effortlessly install your Starlink dish or mount without the need for drilling or permanent fixtures. Whether you're setting up in a vehicle, RV, boat, or other metal structures, these rubber-coated magnets ensure a stable and reliable attachment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Size Options:\u003c\/strong\u003e Choose from \u003cstrong\u003e1 5\/8\"\u003c\/strong\u003e for smaller mounts and \u003cstrong\u003e2 5\/8\"\u003c\/strong\u003e for larger mounts, offering the perfect fit for a variety of Starlink setups and surfaces. Both in \u003cstrong\u003e1\/4\"-20 thread\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerful Magnetic Hold:\u003c\/strong\u003e These magnets are crafted to provide a strong, lasting grip on any magnetic surface, ensuring your Starlink system stays securely in place, even in windy or challenging conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Rubber Coating:\u003c\/strong\u003e The rubber coating protects both the magnet and the surface it attaches to, preventing scratches, dents, and other damage while maintaining a secure, slip-resistant grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick \u0026amp; Easy Setup:\u003c\/strong\u003e Simply place the magnets on a clean, flat metal surface, and you're ready to go. No tools, no drilling—just a simple, hassle-free installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Weather-Resistant:\u003c\/strong\u003e Built to withstand the elements, these rubber magnets are perfect for both indoor and outdoor use, ensuring long-term durability even in harsh weather conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile \u0026amp; Mobile:\u003c\/strong\u003e Ideal for use in RVs, trucks, boats, or any metal surface, these magnets are perfect for mobile Starlink installations, making it easy to reposition or relocate your system as needed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SatGear","offers":[{"title":"1 5\/8\" - 4 Pack ($30)","offer_id":51317946712342,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"2 5\/8\" - 4 Pack ($40)","offer_id":51317946745110,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/Photo-Nov-13-2024_-10-50-04-PM.png?v=1778920251"},{"product_id":"satgear-4-5-inch-suction-cups","title":"4.5\" Suction Cups - 4 Pack","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eAchieve effortless, secure mounting for your Starlink system with these 4.5-inch suction cups, engineered for use with SatGear's Starlink Mounts. Perfect for users who need a flexible, non-permanent installation solution, these suction cups offer a strong, reliable hold on smooth, flat surfaces, making them ideal for mobile setups, temporary installations, or spaces where drilling is not an option.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong Hold:\u003c\/strong\u003e Each suction cup provides a reliable, strong grip, capable of supporting your Starlink dish even in windy conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e No tools or drilling required—simply press the suction cups onto a clean, flat surface and you’re ready to go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Made from high-quality materials, these suction cups are built to withstand the elements, ensuring long-lasting use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed specifically for SatGear Starlink Mounts, but can be adapted for other similar satellite dish mounting needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Convenient:\u003c\/strong\u003e Each cup measures 4.5 inches in diameter, providing ample surface area for a stable hold while remaining discreet and unobtrusive.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SatGear","offers":[{"title":"Default Title","offer_id":51317946777878,"sku":null,"price":97.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/Photo-Nov-13-2024_-11-21-49-PM.png?v=1778920252"},{"product_id":"satgear-3-inch-suction-cups","title":"3\" Suction Cups - 4 Pack","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eAchieve effortless, secure mounting for your Starlink system with these 3-inch suction cups, engineered for use with SatGear Starlink Mounts. Perfect for users who need a flexible, non-permanent installation solution, these suction cups offer a strong, reliable hold on smooth, flat surfaces, making them ideal for mobile setups, temporary installations, or spaces where drilling is not an option.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong Hold:\u003c\/strong\u003e Each suction cup provides a reliable, strong grip, capable of supporting your Starlink dish even in windy conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e No tools or drilling required—simply press the suction cups onto a clean, flat surface and you’re ready to go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Made from high-quality materials, these suction cups are built to withstand the elements, ensuring long-lasting use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Designed specifically for SatGear Starlink Mounts, but can be adapted for other similar satellite dish mounting needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Convenient:\u003c\/strong\u003e Each cup measures 3 inches in diameter, providing ample surface area for a stable hold while remaining discreet and unobtrusive.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SatGear","offers":[{"title":"Default Title","offer_id":51317946810646,"sku":null,"price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/0440\/2198\/files\/Photo-Nov-13-2024_-11-19-02-PM.png?v=1778920254"}],"url":"https:\/\/www.shopstarlinkmounts.com\/collections\/starlink-mini-accessories.oembed","provider":"Starlink Mounts","version":"1.0","type":"link"}